FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 510 Parts

Category: Hydraulic System

[Categories] [All 510 Parts] [All John Deere Models]

Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Item #: 154893, Ref: L34432) $16.40

Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9/16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Item #: 108512, Ref: R34360) $3.80

Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362) $13.90

Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Item #: 111302, Ref: R45822) $3.00

Hydraulic Pump - For John Deere tractor models 510, 700, 710, Replaces John Deere OEM number AL15149, Gear type pump, 11cc, For tractors with power steering, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 114593) $273.00

Hydraulic Pump - For John Deere tractor models 500, 510, 700, 710, Replaces John Deere OEM number AL16963, AL37752, Gear type pump, 16cc, For tractors with power steering, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 114594) $327.00

No
Picture
Hydraulic Pump - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200413, (Item #: 115599) $970.00

Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Item #: 154894, Ref: L34569) $15.30

Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Item #: 114011, Ref: R78202) $7.20

Hydraulic Pump, Remanufactured - For tractor models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, 2130, 3010 Relief Style, 3030, 3130, 4010 Relief Style, 4020, 4040, 4240, 4440, 5010 Relief Style. Hydraulic Pump, Remanufactured. A refundable core charge OF $300.00 will be added to your order. Top Inlet is 7/8 inches, Left Inlet is 1 1/16 inches, Discharge is 7/8 inches. (Item #: 200408, Ref: AR56160-R) $1223.01

No
Picture
Hydraulic Pump, Remanufactured, AR101807 - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a New version of this sku use Item #: 115599, (Item #: 200413) $1223.01

No
Picture
Hydraulic Seal Kit - Backhoe Stabilizer Cylinder - For John Deere Construction and industrial models 510, 640, 655, 655B, 750B, 750C, 850, 850B, Replaces John Deere OEM number RE17345, (Item #: 157023) $47.70

No
Picture
Hydraulic Seal Kit - Blade Lift Cylinder - For John Deere Construction and industrial models 310, 410, 450, 510, 550, 650, 710, 710D, Replaces John Deere OEM number RE37003, Bore: 80 MM, (Item #: 152988) $10.20

Hydraulic Seal Kit - Boom Bucket Cylinder - For John Deere Construction and industrial models 410, 510, 544, 610, 624, 710, 862, Replaces John Deere OEM number RE25151, Rod: 63 MM, (Item #: 152935) $92.00

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 410, 410B, 415, 440, 440C, 448, 510, 515, 540, 548, 610, 640, 648, 710, 862, Replaces John Deere OEM number RE16119, Rod: 2", (Item #: 152875) $33.10

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 410, 415, 440, 440C, 444, 444D, 450, 510, 515, 540, 550, 610, 640, 655, 740, Replaces John Deere OEM number RE14208, RE14523, Rod: 2-1/4", Bore: 4-1/2", (Item #: 153029) $45.20

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 500B, 510, Replaces John Deere OEM number AR105281, Rod: 2-1/2", Bore: 5-1/2", (Item #: 153048) $81.00

Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 410, 510, 610, 710, Replaces John Deere OEM number RE14745, RE14744, Rod: 2-1/2", (Item #: 153170) $49.70

No
Picture
Hydraulic Seal Kit - Boom Cylinder - For John Deere Construction and industrial models 500, 510, Replaces John Deere OEM number AR105443, Rod: 2-1/2", Bore: 5-1/2", (Item #: 153274) $100.00

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 450, 450B, 500B, 510, Replaces John Deere OEM number AR105392, (Item #: 152943) $36.60

No
Picture
Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 500B, 510, Replaces John Deere OEM number AR96526, Rod: 2-1/2", Bore: 4", (Item #: 153275) $97.00

Hydraulic Seal Kit - Bucket Cylinder - For John Deere Construction and industrial models 450, 450B, 450C, 450D, 450E, 510, 510B, 550, 550A, 550B, 610, 610B, 640, 640D, 655, 655B, 710, 710B, 740, 755, 755A, 755B, Replaces John Deere OEM number RE14094, Piston: 4-1/2", (Item #: 153333) $59.00

No
Picture
Hydraulic Seal Kit - Lift Cylinder - For John Deere Construction and industrial models 350, 350B, 350C, 355D, 510, 844, Replaces John Deere OEM number AR105381, Rod: 2", Bore: 3-3/4", (Item #: 153086) $40.40

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number RE21875, (Item #: 152987) $42.90

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number AT108329, (Item #: 153087) $40.80

No
Picture
Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 410, 510, 610, 644, 670, Replaces John Deere OEM number RE20430, (Item #: 153101) $29.00

Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number AH137789, (Item #: 153125) $3.30

No
Picture
Hydraulic Seal Kit - Steering Cylinder - For John Deere Construction and industrial models 310, 410, 510, 610, Replaces John Deere OEM number RE33803, Bore: 50 MM, (Item #: 153175) $19.80

Universal Parts and Accessories
Category: Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $377.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $720.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $28.00

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1159.01

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.37

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $14.60

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $13.91

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $10.70

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All 510 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy